Mr. Gasket 11004C G-Sleeve Hose and Cable Sleeving Kit - Carbon Fiber

Mr. Gasket 11004C G-Sleeve Hose and Cable Sleeving Kit - Carbon Fiber Reviews

Other Picture

Mr. Gasket 11004C G-Sleeve Hose and Cable Sleeving Kit - Carbon Fiber Feature

• Heavy-duty split polyethylene convoluted construction with carbon fiber kit
• Easy to cut with scissors or hot knife
• Protects hoses and cables from chemicals and mechanical abrasion
• Conform to FMVSS 302-automotive test
• Heat range of -40 to 200+ degrees F

This carbon fiber sleeve hose and cable sleeving kit offers a unique and durable alternative to convoluted tubing. They protect the hoses and cables and are an excellent way to organize electrical wiring. They resist oil, gas, and most chemicals and act against mechanical abrasion. They perform on a heat range of -40 degrees F to 200+ degrees F and have a melt temperature of 446 degrees F. These sleeves conform to FMVSS 302-automotive test.

Visit Store Now !!

Detail Products

Detail Reviews

Jul 01, 2011 01:48:07

Holley 0-9015-1 Model 4160 Marine 750 CFM Square Bore 4-Barrel Vacuum Secondary Electric Choke New Carburetor

Holley 0-9015-1 Model 4160 Marine 750 CFM Square Bore 4-Barrel Vacuum Secondary Electric Choke New Carburetor Reviews

Other Picture

Holley 0-9015-1 Model 4160 Marine 750 CFM Square Bore 4-Barrel Vacuum Secondary Electric Choke New Carburetor Feature

• Power valve blow-out protection
• Single inverted flare fuel inlet
• J-style vent tubes direct fuel and fumes back to carburetor
• Features 5" air horn and 30cc accelerator pump
• Meets flooding and back-fire requirements set by U.S. Coast Guard

This marine carburetor is designed to meet flooding and back-fire requirements set by the U.S. Coast Guard and is calibrated to compensate for unique engine loads found on boats. The J-style vent tubes direct fuel and fumes back into the carburetor for safe operation while on rough waters and it features a 5" air horn and 30cc accelerator pump

Visit Store Now !!

Detail Products

Detail Reviews

Jun 29, 2011 16:33:18

Earl's 6453093ERL Speed-Seal Hose End

Earl's 6453093ERL Speed-Seal Hose End Reviews

Other Picture

Earl's 6453093ERL Speed-Seal Hose End Feature

• Reliable And Reusable
• Unmatched Range-Configurations
• Excellent Pressure Capacity
• Use with Earl's Speed Flex Smooth Bore Teflon® Hose Only
• Impervious To Any Fuel Blend

Earls 6453093ERL Speed-Seal Hose End Earl's proven record of reliability and unmatched range of configurations has made Speed-Seal reusable hose ends the choice of professional race teams world wide. Speed-Seal hose ends are available in stainless steel, steel and anodized aluminum, in both low profile and bent tube construction and in adjustable and non-adjustable configurations.Features: Reliable And Reusable; Unmatched Range-Configurations; Excellent Pressure Capacity; Use with Earl's Speed Flex Smooth Bore Teflon Hose Only; Impervious To Any Fuel Blend; Reduces Brake Line SwellInstallation Notes: Hose ends seal on the olive. DO NOT overtorque the socket.

Visit Store Now !!

Detail Products

Detail Reviews

Jun 28, 2011 09:28:19

Earl's 900208 Econ-O-Fit Blue Anodized Aluminum #8 Hose Clamp

Earl's 900208 Econ-O-Fit Blue Anodized Aluminum #8 Hose Clamp Reviews

Other Picture

Earl's 900208 Econ-O-Fit Blue Anodized Aluminum #8 Hose Clamp Feature

• Fits hoses with 5/8- 41/64" O.D. diameter
• Fits stainless steel # 7 or 8 hose size
• Most common applications are vent and oil cooler lines
• Machined from durable aluminum alloy
• Designed with interior grooving to prevent hose "hang ups" on the clamp

This Earl's Econ-O-Fit hose clamp is machined from aluminum alloy with an anodized hose clamp cover. Its hexagonal appearance and finish dresses up any installation. The Econ-O-Fit specially designed interior grooving prevents the hose from hanging up on the clamp and ensures proper placement of the worm gear type clamp with respect to the end of the hose.

Visit Store Now !!

Detail Products

Detail Reviews

Jun 27, 2011 10:13:04

Edelbrock/Russell 651000 Cushion Clamp - Pack of 6

Edelbrock/Russell 651000 Cushion Clamp - Pack of 6 Reviews

Other Picture

Edelbrock/Russell 651000 Cushion Clamp - Pack of 6 Feature

• Optimum method of securing hoses to frames or boat runners
• Holds -10 hose
• Sold as 6 per set
• Absorbs shock and vibration, reduce unwanted noise and prevent galvanic corrosion
• Attached to the supporting structure either with a machine screw and nut or, in blind applications, with a machine screw and a rivnut or plate nut

The Edelbrock/Russell Cushion Clamp is the optimum method of securing hoses to frames or boat runners. The spring steel tab mount with the rubber covered hose loop provides a rigid vibration absorbing mount for hoses and/or tubing.

Visit Store Now !!

Detail Products

• The Hurt Locker

Detail Reviews

Jun 26, 2011 13:08:09

Competition Cams 1400N16 3/8"Nut "

Competition Cams 1400N16 3/8"Nut " Reviews

Other Picture

Competition Cams 1400N16 3/8"Nut " Feature

• 3/8'' NUT

3/8'' NUT

Visit Store Now !!

Detail Products

Detail Reviews

Jun 25, 2011 15:53:03

Aeroquip FCM3482 Vinyl-Coated Steel Support Clamps - Pack of 5

Aeroquip FCM3482 Vinyl-Coated Steel Support Clamps - Pack of 5 Reviews

Other Picture

Aeroquip FCM3482 Vinyl-Coated Steel Support Clamps - Pack of 5 Feature

• Helps you organize and support hoses; useful for long runs and critical bends
• Manufactured from steel for strength and durability, and vinyl-coated to protect your lines
• Clamp has an inside diameter of .44 inches
• Package contains 5 pieces
• 1 year limited manufacturer's warranty

Aeroquip components are an excellent choice for high quality performance plumbing projects. These vinyl-coated steel support clamps provide security for supporting hose in long runs and critical bends. For proper fit, choose a clamp with an inside diameter that closely matches the outside diameter of the hose. Please note: Eaton Aeroquip fitting tolerances are engineered to match Eaton Aeroquip hose tolerances. The use of Aeroquip fittings on hose supplied by other manufacturers and/or the use of Eaton Aeroquip hose with fittings supplied by other manufacturers may result in the production of unreliable and unsafe hose assemblies and is neither recommended or authorized by Eaton.

Visit Store Now !!

Detail Products

Detail Reviews

Jun 23, 2011 19:06:04

Aeroquip FCM3481 Vinyl-Coated Steel Support Clamps - Pack of 5

Aeroquip FCM3481 Vinyl-Coated Steel Support Clamps - Pack of 5 Reviews

Other Picture

Aeroquip FCM3481 Vinyl-Coated Steel Support Clamps - Pack of 5 Feature

• Helps you organize and support hoses; useful for long runs and critical bends
• Manufactured from steel for strength and durability, and vinyl-coated to protect your lines
• Clamp has an inside diameter of .25 inches
• Package contains 5 pieces
• 1 year limited manufacturer's warranty

Aeroquip components are an excellent choice for high quality performance plumbing projects. These vinyl-coated steel support clamps provide security for supporting hose in long runs and critical bends. For proper fit, choose a clamp with an inside diameter that closely matches the outside diameter of the hose. Please note: Eaton Aeroquip fitting tolerances are engineered to match Eaton Aeroquip hose tolerances. The use of Aeroquip fittings on hose supplied by other manufacturers and/or the use of Eaton Aeroquip hose with fittings supplied by other manufacturers may result in the production of unreliable and unsafe hose assemblies and is neither recommended or authorized by Eaton.

Visit Store Now !!

Detail Products

Detail Reviews

Jun 22, 2011 11:52:12

Spectre 1168 Chrome Magna-Clamp Hose Clamps - Pair

Spectre 1168 Chrome Magna-Clamp Hose Clamps - Pair Reviews

Other Picture

Spectre 1168 Chrome Magna-Clamp Hose Clamps - Pair Feature

• Stainless-steel gear drive clamp eases installation
• 2-piece housing
• Fits 5/32" internal diameter hoses
• Made of machined aluminum with chrome finish
• Sold as a pair

This radiator hose clamp features a 2-piece aluminum housing with a built in stainless-steel gear drive clamp that provides a secure seal. It is made of aluminum with a chrome finish to give the look of race car plumbing. It slips over the hose, is tightened down with a concealed stainless-steel worm gear clamp, and is ideal for race, street, and show applications. It fits 5/32" internal diameter hoses and is not intended for use as a hose for fluids like fuel, oil, or water.

Visit Store Now !!

Detail Products

• Spectre 2268 Chrome Magna-Clamp Fuel Line Fitting, Pack of 2
• Spectre 19206 Stainless Steel-Flex Vacuum Line - 6-Feet Long
• Spectre 1268 Chrome Magna-Clamp Hose Clamps - Pair
• Spectre 29406 Fuel Hose 3/8 X 6 Stainless
• Spectre 2168 Magna-Clamp Hose Clamp - Chrome

Detail Reviews

Jun 21, 2011 00:30:09

Earl's 618103ERL Speed-Seal Hose End

Earl's 618103ERL Speed-Seal Hose End Reviews

Other Picture

Earl's 618103ERL Speed-Seal Hose End Feature

• Reliable And Reusable
• Unmatched Range-Configurations
• Excellent Pressure Capacity
• Use with Earl's Speed Flex Smooth Bore Teflon® Hose Only
• Impervious To Any Fuel Blend

Speed-Seal Hose End Hose Size -03AN Nut Size 3 Steel Adj. Tube 180 deg. Not Recomm. On Automotive Brake Systems Avoid Over Torquing w/Alum. Sockets

Visit Store Now !!

Detail Products

Detail Reviews

Jun 18, 2011 16:37:04

Billet Specialties 68425 0.739 x 0.969 Polished Hose Separator

Billet Specialties 68425 0.739 x 0.969 Polished Hose Separator Reviews

Other Picture

 Billet Specialties #68425 Hose Separator, Billet Aluminum, Polished, One .734 in. Hole/One .969 in. Hole, Each. B07-68425 Description:Billet Specialties hose separators are precision machined from 6061-T6 billet aluminum and are available in many popular combinations and sizes. Sold individually.Features:Industry leading mirror finish polishStainless boltSpecifications:Brand:Billet SpecialtiesProduct Line:Billet Specialties Hose SeparatorsPart Type:Hose Mounting ClampsPart Number:B07-68425Hose Outside Diameter (in):0.734 in.Hose Outside Diameter 2 (in):0.969 in.Insulated:NoHose Quantity Per Clamp:2Hardware Included:YesHose Clamp Material:Billet AluminumHose Clamp Finish:PolishedQuantity:Sold individually.

Visit Store Now !!

Detail Products

Detail Reviews

Jun 17, 2011 20:48:07

Earl's 604603ERL Speed-Seal Hose End

Earl's 604603ERL Speed-Seal Hose End Reviews

Other Picture

Earl's 604603ERL Speed-Seal Hose End Feature

• Reliable And Reusable
• Unmatched Range-Configurations
• Excellent Pressure Capacity
• Use with Earl's Speed Flex Smooth Bore Teflon® Hose Only
• Impervious To Any Fuel Blend

Earls 604603ERL Speed-Seal Hose End Earl's proven record of reliability and unmatched range of configurations has made Speed-Seal reusable hose ends the choice of professional race teams world wide. Speed-Seal hose ends are available in stainless steel, steel and anodized aluminum, in both low profile and bent tube construction and in adjustable and non-adjustable configurations.Features: Reliable And Reusable; Unmatched Range-Configurations; Excellent Pressure Capacity; Use with Earl's Speed Flex Smooth Bore Teflon Hose Only; Impervious To Any Fuel Blend; Reduces Brake Line SwellInstallation Notes: Hose ends seal on the olive. DO NOT overtorque the socket.

Visit Store Now !!

Detail Products

Detail Reviews

Jun 16, 2011 18:56:06

Vibrant 2794 Stainless Steel T-Bolt Clamp

Vibrant 2794 Stainless Steel T-Bolt Clamp Reviews

Other Picture

Vibrant 2794 Stainless Steel T-Bolt Clamp Feature

• Provides reliable leak-proof connections
• Constructed from highly durable t304 stainless steel
• Includes bolt and lock nut
• Features a ?floating bridge? design
• Corrosion resistant

Vibrant Stainless steel T-Bolt Clamp provides reliable leak-proof connections for hose and tube assemblies. It is constructed from highly durable T304 Stainless steel and includes bolt and lock nut. It features a “Floating Bridge” design to prevent hose buckling when clamp is torque.

Visit Store Now !!

Detail Products

• Vibrant 2795 Stainless Steel T-Bolt Clamp
• Vibrant 2791 Stainless Steel T-Bolt Clamp
• Vibrant 2714 Black 4 Ply Silicone Sleeve
• How to Tune and Modify Engine Management Systems (Motorbooks Workshop)

Detail Reviews

Jun 14, 2011 21:18:04

Earl's 609193ERL Speed-Seal Hose End

Earl's 609193ERL Speed-Seal Hose End Reviews

Other Picture

Earl's 609193ERL Speed-Seal Hose End Feature

• Reliable And Reusable
• Unmatched Range-Configurations
• Excellent Pressure Capacity
• Use with Earl's Speed Flex Smooth Bore Teflon® Hose Only
• Impervious To Any Fuel Blend

Earls 609193ERL Speed-Seal Hose End Earl's proven record of reliability and unmatched range of configurations has made Speed-Seal reusable hose ends the choice of professional race teams world wide. Speed-Seal hose ends are available in stainless steel, steel and anodized aluminum, in both low profile and bent tube construction and in adjustable and non-adjustable configurations.Features: Reliable And Reusable; Unmatched Range-Configurations; Excellent Pressure Capacity; Use with Earl's Speed Flex Smooth Bore Teflon Hose Only; Impervious To Any Fuel Blend; Reduces Brake Line SwellInstallation Notes: Hose ends seal on the olive. DO NOT overtorque the socket.

Visit Store Now !!

Detail Products

Detail Reviews

Jun 13, 2011 04:07:06

Spectre 1162 Magna-Clamps 5/32 Red 2 Each

Spectre 1162 Magna-Clamps 5/32 Red 2 Each Reviews

Other Picture

Spectre 1162 Magna-Clamps 5/32 Red 2 Each Feature

• Red
• 2 per package
• For 5/32 inside diameter line
• Machined aluminum

Spectre's Magna-Clamp Hose Fittings Feature A Two-Piece Aluminum Housing That Provides Secure Tightening At A Fraction Of What Any "An-Type Fitting Would Cost. They Are Ideal For Race, Street Or Show.

Visit Store Now !!

Detail Products

• Spectre 19206 Stainless Steel-Flex Vacuum Line - 6-Feet Long
• Spectre 1266 Magna-Clamps 7/32 Blue 2 Each
• Spectre 19103 Stainless Steel-Flex Vacuum Line - 3-Feet Long
• Spectre 1262 Magna-Clamps 7/32 Red 2 Each
• Spectre 1168 Chrome Magna-Clamp Hose Clamps - Pair

Detail Reviews

Jun 12, 2011 06:32:08

Aeroquip FBM1206 3/8" Socketless Hose End

Aeroquip FBM1206 3/8" Socketless Hose End Reviews

Other Picture

Aeroquip Socketless Hose Ends Fitting, Hose End, AQP Socketless, Straight, -8 AN Hose Barb to Male 3/ 8 in. NPT, Brass, Natural, Each

Visit Store Now !!

Detail Products

Detail Reviews

Jun 10, 2011 21:02:08

Mr. Gasket 11004N G-Sleeve G-Sport Hose and Cable Sleeving Kit - Orange

Mr. Gasket 11004N G-Sleeve G-Sport Hose and Cable Sleeving Kit - Orange Reviews

Other Picture

Mr. Gasket 11004N G-Sleeve G-Sport Hose and Cable Sleeving Kit - Orange Feature

• Abrasion, chemical and UV light resistant
• Resists oil, gas and most chemicals, protects against mechanical abrasion
• Heat range: -40 degrees to 200+ degrees Fahrenheit with melting point at 446 degrees Fahrenheit
• Organizes electrical wiring
• Heavy-duty split Polyethylene convoluted construction

Mr. Gasket Hose and Cable Sleeving Kits protect hoses and cable and are also a great way to organize electrical wiring. G-Sleeve kits resist oil, gas and most chemicals and protect against mechanical abrasion. These sleeving kits feature heavy duty split Polyethylene convoluted construction and are UV light resistant for maximum protection. They are easy to cut with scissors or a hot knife and can be cleaned easily with mild soap and water. G-Sleeve conforms to the FMVSS 302-Automotive test with a continuous operating temperature of -40 degrees Fahrenheit to 200+ degrees Fahrenheit and a melting temperature of 446 degrees Fahrenheit.

Visit Store Now !!

Detail Products

Detail Reviews

Jun 09, 2011 11:00:06